Code

Board Properties
name=Arduino Nano 33 BLE
build.core=arduino
build.crossprefix=arm-none-eabi-
build.compiler_path={runtime.tools.arm-none-eabi-gcc.path}/bin/
build.variant=ARDUINO_NANO33BLE
build.mcu=cortex-m4
build.extra_flags=
build.architecture=cortex-m4
build.board=ARDUINO_NANO33BLE
build.ldscript=linker_script.ld
compiler.mbed.arch.define=-DARDUINO_ARCH_NRF52840
compiler.mbed.defines={build.variant.path}/defines.txt
compiler.mbed.ldflags={build.variant.path}/ldflags.txt
compiler.mbed.cflags={build.variant.path}/cflags.txt
compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt
compiler.mbed.includes={build.variant.path}/includes.txt
compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys
compiler.mbed="{build.variant.path}/libs/libmbed.a" "{build.variant.path}/libs/libcc_310_core.a" "{build.variant.path}/libs/libcc_310_ext.a" "{build.variant.path}/libs/libcc_310_trng.a"
vid.0=0x2341
pid.0=0x005a
vid.1=0x2341
pid.1=0x805a
upload.tool=bossac
upload.protocol=
upload.use_1200bps_touch=true
upload.wait_for_upload_port=true
upload.native_usb=true
upload.maximum_size=983040
upload.maximum_data_size=262144
bootloader.tool=openocd
bootloader.extra_action.preflash=nrf5 mass_erase
bootloader.config=-f target/nrf52.cfg
bootloader.programmer=-f interface/cmsis-dap.cfg
bootloader.file=nano33ble/bootloader.hex
tools.openocd.build.openocdscript=target/nrf52.cfg
runtime.ide.path=C:\Program Files (x86)\Arduino
runtime.os=windows
rdware\mbed\1.1.4\system
runtime.ide.version=108013
target_package=arduino
target_platform=mbed
o\hardware\mbed
originalid=nano33ble
intellisense.tools.path={runtime.tools.arm-none-eabi-gcc.path}
path}\lib\gcc\arm-none-eabi\7.2.1\include;{vm.intellisense.add-paths}
tools.vmopenocd.scriptPath=-s "{path}/share/openocd/scripts/"
tools.f2232mm.server.targetCmd=-c "transport select swd" -c "ftdi_layout_signal SWD_EN -data 0" -f "{tools.openocd.build.openocdscript}"
tools.f2232mm.debug.args=-ex "flushregs"
debug_menu.debugger_type.hwdebugger=Hardware
debug_menu.hwdebugger=Debugger
debug_menu.hwdebugger.f2232mm=F2232H Mini Module
debug_menu.hwdebugger.f2232mm.debug.tool=f2232mm
meta_f2232mm.sentence=This debugger will require some wiring to connect it to your target board (and the SWD changes on-board)
meta_f2232mm.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to  > 'No Optimization' to ensure correct debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)
meta_f2232mm.image.connect=https://www.visualmicro.com/pics/Debug-Help-NRF52-FT2232MM-Connections.png
meta_f2232mm.image.operation=https://www.visualmicro.com/pics/Debug-Break-NRF52-FT2232MM-VSOnly.png
meta_f2232mm.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
version=1.1.4
compiler.warning_flags=-w
compiler.warning_flags.none=-w
compiler.warning_flags.default=
compiler.warning_flags.more=-Wall
compiler.warning_flags.all=-Wall -Wextra
compiler.path={build.compiler_path}
compiler.c.cmd={build.crossprefix}gcc
compiler.c.flags=-c {compiler.warning_flags} -Os -g -nostdlib "@{compiler.mbed.defines}" "@{compiler.mbed.cflags}" {compiler.mbed.arch.define} -MMD -mcpu={build.mcu}
compiler.c.elf.cmd={build.crossprefix}g++
compiler.c.elf.flags=-Wl,--gc-sections {compiler.warning_flags} -Wl,--as-needed
compiler.S.flags=-c -g -x assembler-with-cpp -Os -mcpu={build.mcu}
compiler.cpp.cmd={build.crossprefix}g++
compiler.cpp.flags=-c {compiler.warning_flags} -g -Os -nostdlib "@{compiler.mbed.defines}" "@{compiler.mbed.cxxflags}" {compiler.mbed.arch.define} -MMD -mcpu={build.mcu}
compiler.ar.cmd={build.crossprefix}ar
compiler.ar.flags=rcs
compiler.objcopy.cmd=
compiler.objcopy.eep.flags=
compiler.elf2hex.bin.flags=-O binary
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
compiler.elf2hex.cmd={build.crossprefix}objcopy
compiler.ldflags=
compiler.libraries.ldflags=
compiler.size.cmd={build.crossprefix}size
compiler.define=-DARDUINO=
build.extra.startobjects=
build.extra.endobjects=
compiler.c.extra_flags=
compiler.c.elf.extra_flags=
compiler.S.extra_flags=
compiler.cpp.extra_flags=
compiler.ar.extra_flags=
compiler.objcopy.eep.extra_flags=
compiler.elf2hex.extra_flags=
build.usb_flags=
build.zip.pattern={recipe.size.pattern}
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch}  {build.extra_flags} {compiler.c.extra_flags} "-I{build.core.path}/api/deprecated" {includes} "-iprefix{build.core.path}" "@{compiler.mbed.includes}" -o "{object_file}" "{source_file}"
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {includes} {build.extra_flags} {compiler.cpp.extra_flags} "-I{build.core.path}/api/deprecated" "-iprefix{build.core.path}" "@{compiler.mbed.includes}" "{source_file}" -o "{object_file}"
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}"  "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "@{compiler.mbed.ldflags}" "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--whole-archive "{build.path}/{archive_file}" {compiler.mbed} -Wl,--no-whole-archive -Wl,--start-group {compiler.mbed.extra_ldflags} {compiler.libraries.ldflags} -Wl,--end-group
recipe.objcopy.eep.pattern=
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
recipe.size.regex=^(?:\.data|\.text)\s+([0-9]+).*
recipe.output.tmp_file={build.project_name}.bin
recipe.output.save_file={build.project_name}.{build.variant}.bin
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino9.path}
tools.openocd.cmd=bin/openocd.exe
tools.openocd.cmd.windows=bin/openocd.exe
tools.openocd.upload.params.verbose=-d2
tools.openocd.upload.params.quiet=-d0
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" {bootloader.programmer} {bootloader.config} -c "telnet_port disabled; init; reset init; halt; adapter_khz 10000; program {{build.path}/{build.project_name}.elf}; reset run; shutdown"
tools.openocd.program.params.verbose=-d2
tools.openocd.program.params.quiet=-d0
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" {bootloader.programmer} {bootloader.config} -c "telnet_port disabled; init; reset init; halt; adapter_khz 10000; program {{build.path}/{build.project_name}.elf}; reset run; shutdown"
tools.openocd.erase.params.verbose=-d2
tools.openocd.erase.params.quiet=-d0
tools.openocd.erase.pattern=
tools.openocd.bootloader.params.verbose=-d2
tools.openocd.bootloader.params.quiet=-d0
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" {bootloader.programmer} {bootloader.config} -c "telnet_port disabled; init; reset init; halt; adapter_khz 10000; {bootloader.extra_action.preflash}; program {{runtime.platform.path}/bootloaders/{bootloader.file}}; reset run; shutdown"
tools.bossac.path={runtime.tools.bossac-1.9.1-arduino1.path}
tools.bossac.cmd=bossac.exe
tools.bossac.cmd.windows=bossac.exe
tools.bossac.upload.params.verbose=-d
tools.bossac.upload.params.quiet=
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i -e -w "{build.path}/{build.project_name}.bin" -R
tools.vmopenocd.cmd=bin/openocd.exe
tools.vmopenocd.cmd.windows=bin/openocd.exe
tools.vmopenocd.debug.params.verbose=-d2
tools.vmopenocd.debug.params.quiet=-d0
tools.vmopenocd.debug.address=localhost:3333
tools.vmopenocd.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.vmopenocd.logging=-l "{{build.path}/{build.project_name}_DebugOpenOCD.log}"
tools.vmopenocd.boardCmd=
tools.vmopenocd.targetCmd=
tools.vmopenocd.initCmd=
tools.vmopenocd.debug.pattern="{path}/{cmd}" {debug.verbose} {logging} {scriptPath} {boardCmd} {targetCmd} {initCmd}
tools.vmopenocd.program.cmd=bin/openocd.exe
tools.vmopenocd.program.cmd.windows=bin/openocd.exe
tools.vmopenocd.program.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.vmopenocd.program.address=localhost:3333
tools.vmopenocd.program.params.verbose=-d2
tools.vmopenocd.program.params.quiet=-d0
tools.vmopenocd.program.elf.message=****[vMicro]**** Uploading ELF :
tools.vmopenocd.program.pattern="{path}/{cmd}" {program.verbose} {scriptPath} {boardCmd} {targetCmd} -c "echo -n {{program.elf.message}}" {programCmd}
tools.atmelICE.protocol=
tools.atmelICE.debug.cmd=arm-none-eabi-gdb.exe
tools.atmelICE.debug.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.atmelICE.debug.pattern="{path}/{cmd}"
tools.atmelICE.server.initCmd=-c "init; reset halt"
vs-cmd.Debug.AttachtoProcess.tools.atmelICE.server.initCmd=-c "init"
tools.atmelICE.server.boardCmd=-c "adapter driver cmsis-dap" -c "cmsis_dap_vid_pid 0x03eb 0x2141"
tools.atmelICE.server.tool=vmopenocd
tools.atmelICE.program.scriptPath=-s "{program.path}/scripts/"
tools.atmelICE.program.boardCmd=-c "adapter driver cmsis-dap" -c "cmsis_dap_vid_pid 0x03eb 0x2141"
tools.atmelICE.program.cmd=bin/openocd.exe
tools.atmelICE.program.cmd.windows=bin/openocd.exe
tools.atmelICE.program.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.atmelICE.program.address=localhost:3333
tools.atmelICE.program.params.verbose=-d2
tools.atmelICE.program.params.quiet=-d0
tools.atmelICE.program.elf.message=****[vMicro]**** Uploading ELF :
tools.atmelICE.program.pattern="{program.path}/{program.cmd}" {program.verbose} {program.scriptPath} {program.boardCmd} {program.targetCmd} -c "echo -n {{program.elf.message}}" {program.programCmd}
tools.atmelICE.program.extra_params=
tools.atmelICE.program.protocol=
tools.atmelICE.erase.params.verbose=-d3
tools.atmelICE.erase.params.quiet=-d0
tools.atmelICE.erase.pattern=
tools.jlink.cmd=arm-none-eabi-gdb.exe
tools.jlink.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.jlink.pattern="{path}/{cmd}"
tools.jlink.server.tool=vmopenocd
tools.jlink.server.boardCmd=-f "interface/jlink.cfg"
tools.jlink.server.initCmd=-c "init; reset halt"
vs-cmd.Debug.AttachtoProcess.tools.jlink.server.initCmd=-c "init"
tools.jlink.program.scriptPath=-s "{program.path}/scripts/"
tools.jlink.program.boardCmd=-f "interface/jlink.cfg"
tools.jlink.program.cmd=bin/openocd.exe
tools.jlink.program.cmd.windows=bin/openocd.exe
tools.jlink.program.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.jlink.program.address=localhost:3333
tools.jlink.program.params.verbose=-d2
tools.jlink.program.params.quiet=-d0
tools.jlink.program.elf.message=****[vMicro]**** Uploading ELF :
tools.jlink.program.pattern="{program.path}/{program.cmd}" {program.verbose} {program.scriptPath} {program.boardCmd} {program.targetCmd} -c "echo -n {{program.elf.message}}" {program.programCmd}
tools.jlink.upload.scriptPath=-s "{upload.path}/scripts/"
tools.jlink.upload.boardCmd=-f "interface/jlink.cfg"
tools.jlink.upload.cmd=bin/openocd.exe
tools.jlink.upload.cmd.windows=bin/openocd.exe
tools.jlink.upload.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.jlink.upload.address=localhost:3333
tools.jlink.upload.params.verbose=-d2
tools.jlink.upload.params.quiet=-d0
tools.jlink.upload.elf.message=****[vMicro]**** Uploading ELF :
tools.jlink.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c "echo -n {{upload.elf.message}}" {upload.programCmd}
tools.bmp_upload.cmd=arm-none-eabi-gdb.exe
tools.bmp_upload.debug.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
tools.bmp_upload.program.cmd=bin/arm-none-eabi-gdb.exe
tools.bmp_upload.program.cmd.windows=bin/arm-none-eabi-gdb.exe
tools.bmp_upload.program.path={runtime.tools.arm-none-eabi-gcc.path}
tools.bmp_upload.upload.cmd=bin/arm-none-eabi-gdb.exe
tools.bmp_upload.upload.cmd.windows=bin/arm-none-eabi-gdb.exe
tools.bmp_upload.upload.path={runtime.tools.arm-none-eabi-gcc.path}
tools.bmp_upload.server.initCmd=-c "init; reset halt"
vs-cmd.Debug.AttachtoProcess.tools.bmp_upload.server.initCmd=-c "init"
tools.stlinkv2.description=
tools.stlinkv2.cmd=arm-none-eabi-gdb.exe
tools.stlinkv2.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.stlinkv2.pattern="{path}/{cmd}"
tools.stlinkv2.server.tool=vmopenocd
tools.stlinkv2.server.boardCmd=-f "interface/stlink.cfg"
tools.stlinkv2.server.initCmd=-c "init; reset halt"
vs-cmd.Debug.AttachtoProcess.tools.stlinkv2.server.initCmd=-c "init"
tools.stlinkv2.upload.scriptPath=-s "{upload.path}/scripts/"
tools.stlinkv2.upload.boardCmd=-f "interface/stlink.cfg"
tools.stlinkv2.upload.cmd=bin/openocd.exe
tools.stlinkv2.upload.cmd.windows=bin/openocd.exe
tools.stlinkv2.upload.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.stlinkv2.upload.address=localhost:3333
tools.stlinkv2.upload.params.verbose=-d2
tools.stlinkv2.upload.params.quiet=-d0
tools.stlinkv2.upload.elf.message=****[vMicro]**** Uploading ELF :
tools.stlinkv2.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c "echo -n {{upload.elf.message}}" {upload.programCmd}
tools.stlinkv2.upload.extra_params=
tools.stlinkv2.upload.protocol=
tools.stlinkv2.protocol=
tools.f2232mm.cmd=arm-none-eabi-gdb.exe
tools.f2232mm.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.f2232mm.pattern="{path}/{cmd}" {args}
tools.f2232mm.server.tool=vmopenocd
tools.f2232mm.server.boardCmd=-f "interface/ftdi/minimodule.cfg"
tools.f2232mm.server.initCmd=-c "init; reset halt"
vs-cmd.Debug.AttachtoProcess.tools.f2232mm.server.initCmd=-c "init"
tools.f2232mm.upload.scriptPath=-s "{upload.path}/scripts/"
tools.f2232mm.upload.boardCmd=-f "interface/ftdi/minimodule.cfg"
tools.f2232mm.upload.cmd=bin/openocd.exe
tools.f2232mm.upload.cmd.windows=bin/openocd.exe
tools.f2232mm.upload.path={runtime.tools.openocd-0.10.0.20200213.path}
tools.f2232mm.upload.address=localhost:3333
tools.f2232mm.upload.params.verbose=-d2
tools.f2232mm.upload.params.quiet=-d0
tools.f2232mm.upload.elf.message=****[vMicro]**** Uploading ELF :
tools.f2232mm.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c "echo -n