Jan 29th, 2026 at 3:22pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Arduino Due com port
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Arduino Due com port (Read 3112 times)
bk13
Junior Member
**
Offline


Posts: 27
Joined: Aug 23rd, 2020
Arduino Due com port
Sep 7th, 2020 at 12:43am
Print Post  
Windows 10, probably latest update. Visual Studio Professional 2017, Version 15.9.12
I am not certain this is the proper place.  Do I need to change forums?
I am shifting from Arduino Genuino to VS and need assistance finding some things.  
What are the steps to monitor the com port?

Select Debug -> <project_name> Properties  
Field Target Platform contains:  Windows 10.   That does not seem right.  The target is an Arduino DUE.

Select Build -> Run Code Analysis on Solution.  After a few seconds VS posts the message, in part:
Rebuild All: 1 succeeded, o failed, o skipped.
Cool.  Where is the analysis? The result that is.
« Last Edit: Sep 7th, 2020 at 12:44am by bk13 »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Arduino Due com port
Reply #1 - Sep 7th, 2020 at 12:54am
Print Post  
Hi

There are a few ways to open the serial monitor. The easiest is to use the vMicro tool bar button or menu. On that you will see the port neat the bottom with "View Port Monitor" just below it. The same should be on a tool bar when you have an Arduino project open.

The documentation is here, I suggest following the guides near the top, creating projects,  opening projects, first steps etc.
https://www.visualmicro.com/page/User-Guide.aspx?doc=index

If you use the Visual Studio Build or Debug menus then stick to Build>Solution or Project and to Build + Upload use Debug>Start without debugging or Debug>Start with debugging. The build/start commands do the same as the ones shown on the vMicro menu.

If you have continued problems then please postr a screen shot of the entire IDE with an Arduino project open.

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
bk13
Junior Member
**
Offline


Posts: 27
Joined: Aug 23rd, 2020
Re: Arduino Due com port
Reply #2 - Sep 7th, 2020 at 12:56am
Print Post  
Wow!  Did not expect a reply so fast.  Found the monitor.  My brain just would not recognize it.  Working your link.
Thank you.

Edit:
I have been there before.  Because of differences between my system and those pages I presume it is primarily directed to the Atmel Studio.  I think I am not using that, pure Visual Studio instead.  But, am not certain of that.  Already had several versions of Visual Studio and am pretty sure I went that way.
I copied in code from a running Genuino project. It builds and downloads.  F10 and F12 do not do anything.  I am not confident all the setups are correct so go for the dumb mistakes first.  I selected a screen shot so lets see if that was done properly.
« Last Edit: Sep 7th, 2020 at 1:14am by bk13 »  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Arduino Due com port
Reply #3 - Sep 7th, 2020 at 12:59am
Print Post  
Great, if you need to monitor an additional port(s) unrelated to the upload port then use vMicro>General>Monitor Alternative.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
bk13
Junior Member
**
Offline


Posts: 27
Joined: Aug 23rd, 2020
Re: Arduino Due com port
Reply #4 - Sep 7th, 2020 at 1:26am
Print Post  
Follow up.  I probably should have started a new post rather than editing the previous.

Edit:  The Output windows is stingy with new lines and must be scrolled left and right.  Any way to configure that.
It tells me the serial debugger was delayed waiting for an incoming line of data.  ….
The last few lines in the Output window are: 
Quote:

Program Running 'ac_condensor_monitor'
User Experience: The serial debugger was delayed waiting for an incoming line of data. If the Serial.print() command is used between breakpoints, then ensure that a line termnator is sent using .println() or .print("\r\n"). Optionally, use #if defined(VM_DEBUG) to add code that is only active when debugging. (if this is expected then switch this user experience message off in tools>options>visual micro>micro debug)
Debugging has exited

I never got to start debugging.  The code does use println() rather than print().
I do use println() rather than print()
End result: I cannot do any debugging.  
  
Back to top
 
IP Logged
 
bk13
Junior Member
**
Offline


Posts: 27
Joined: Aug 23rd, 2020
Environment list error
Reply #5 - Sep 7th, 2020 at 2:50am
Print Post  
Still trying to get my first debugging session going.  F10 and F11 do not do anything.  Panel Variable Explorer declares: Error retrieving environment list.  That panel is posted.
Clicking on that line to open it does not provide any additional information.
What do I need to do different?
« Last Edit: Sep 7th, 2020 at 2:51am by bk13 »  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2847
Joined: Feb 13th, 2019
Re: Arduino Due com port
Reply #6 - Sep 7th, 2020 at 9:02am
Print Post  
The Output Window Text Wrapping can be switched on / off using the word wrap button on the far right of the Output Window Toolbar
https://docs.microsoft.com/en-us/visualstudio/ide/reference/output-window?view=v...

The Serial Debugger you are using has custom windows for variable tracking, and we always recommend working through the walk through guide to get started with this feature:
Debugging Tutorial for Arduino

F10 and F11 are for Step Into / Over which are not available in the Serial Debugger at present, with more detail on the different debuggers outlined below.
Differences between Visual Micro Debugging, Gdb Debugging and Visual Studio's Debugging of Native Platforms

As you can have a larger number of breakpoints with the Serial Debugger, you can add a break into each function for example, and if you wanted to only stop on these in a specific scenario, then using the conditional breakpoints features is also useful.
Conditional Breakpoints
Video: Conditional Debugging for Arduino Projects
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.