Visual Micro - Postupload Hook not working

Feb 28^th, 2021 at 8:53am

Welcome, Guest. Please Login or Register

When Logging a Support Issue in the Forum, please ensure you have also:- Enabled vMicro > Compiler > Show Build Properties and Verbose Re-Compile your program with these settings enabled	Save the new Output to a Text File and.... Click the Reply button and attach as .txt file OR Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you

Visual Micro › › › Postupload Hook not working

‹ Previous Topic | Next Topic ›

Pages: 1

Postupload Hook not working (Read 220 times)

Mariusz

Newbies

Offline

Posts: 3

Postupload Hook not working
Nov 18^th, 2020 at 2:07pm

Hello,

I'm currently working on Arduino Due project.

I've created flashuploader program in order to download flash data just before the upload process starts.
When it's done, flashuploader reads binary file and send it back to Due flash.

To achieve that, I'm using board.txt with hooks entries.
recipe.hooks.deploy.preupload.pattern=cmd.exe /c "D:\FlashUploader\flashuploader.exe {serial.port} FTD D:\binary.bin"
recipe.hooks.deploy.postupload.pattern=cmd.exe /c "D:\FlashUploader\flashuploader.exe {serial.port} DTF D:\binary.bin"

Everything worked until new Atmel/Microchip installation/update.

At the moment, preupload hook works well BUT postupload never run.
For sure, there are no upload errors during the process.

Any suggestions?

« Last Edit: Nov 19^th, 2020 at 6:25am by Mariusz »

IP Logged

Tim@Visual Micro Administrator Offline Posts: 10935 United Kingdom	Re: Postupload Hook not working Reply #1 - Nov 18^th, 2020 at 2:46pm dud you try the latest visual micro from the new releases section of this forum
Back to top	Tim Leek home IP Logged

Simon@Visual Micro Administrator Offline Posts: 698	Re: Postupload Hook not working Reply #2 - Nov 18^th, 2020 at 3:41pm Once updated, the below hook should work in its place: Code: recipe.hooks.vmdeploy.postupload.pattern=
Back to top	IP Logged

Mariusz Newbies Offline Posts: 3	Re: Postupload Hook not working Reply #3 - Nov 19^th, 2020 at 6:23am Thank you! I works! I'm using two hooks now: Code: recipe.hooks.deploy.preupload.pattern recipe.hooks.vmdeploy.postupload.pattern Seems like preupload hook stays the same as it was before.
Back to top	IP Logged

Simon@Visual Micro Administrator Offline Posts: 698	Re: Postupload Hook not working Reply #4 - Nov 24^th, 2020 at 2:15pm Thanks, we have aligned this in the latest version (20.09.10.16) from the below board, so the recipe.hooks.vmdeploy.postupload.pattern works as expected:- https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page