VS Arduino - 'generic' 328PB as target

Mar 31^st, 2026 at 11:46am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

'generic' 328PB as target (Read 3545 times)

TTSS Newbies Offline Posts: 2 Joined: Jan 28^th, 2021	'generic' 328PB as target Jan 28^th, 2021 at 11:27pm	Print Post
	Hello All, Is it possible to compile and upload to a 'generic' 328PB board through Visual Micro? This 'generic' board is just a ATMega328PB, a crystal, and an ISP port. Well, and a few bypass caps and a pull-up on reset. I'm using an AVR-ICE as the programmer. The 'issue' seems to me that VisualMicro gets it's list of targets from the loaded boards in the Arduino IDE, not from the target one selects in AS7. Thoughts? Thank You. -Jaco


	IP Logged

Simon@Visual Micro Administrator Online Posts: 2880 Joined: Feb 13^th, 2019	Re: 'generic' 328PB as target Reply #1 - Jan 29^th, 2021 at 4:41pm	Print Post
	To use the Arduino cores and libraries, the Arduino board selections (and underlying configuration) has to be used. There appears to be a board package available for Arduino, for the 328PB chip, which may allow this to work using the Arduino Framework: https://github.com/watterott/ATmega328PB-Testing


	WWW Facebook Twitter YouTube IP Logged

TTSS Newbies Offline Posts: 2 Joined: Jan 28^th, 2021	Re: 'generic' 328PB as target Reply #2 - Jan 29^th, 2021 at 6:54pm	Print Post
	Thank You Simon. The Wattuino Pro Mini PB is functionally identical to what I'm doing.....a 'generic, bare bones' 328PB. They add a board selection for the Atmel atmega 328PB Xplained mini development board. So this is a step closer.


	IP Logged

doc arduino Newbies Offline Posts: 8 Joined: Aug 10^th, 2015	Re: 'generic' 328PB as target Reply #3 - Jul 5^th, 2021 at 1:03pm	Print Post
	Hi, Hello, maybe still helpful. You can go to Micro Explorer -> Manage Libraries > under additional boards add the following line Code https://mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json Read here https://github.com/MCUdude/MiniCore save it, wait a while and restart AS/VS if necessary.
	« Last Edit: Jul 5^th, 2021 at 9:45pm by Tim@Visual Micro »

	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›