Hello,

I've updated my esp32 board definition to the latest version of the arduino-esp32 package who support the esp32s2 like said here : https://github.com/espressif/arduino-esp32#esp32-s2-and-esp32-c3-support but I have one problem now, when I try to compile my code, the uploader say "esptool write_flash: error: argument <address> <filename>: [Errno 2] No such file or directory: .ino.bootloader.bin'"

To reproduce the problem, just create an empty project with "ESP32S2 Dev Module" as target and voila

This file is created but is deleted just before the upload, why and by who, I don't know.

Oh, and I forget to mention that Expressif has deleted all branches used for esp32s2 until now....

I confirm, it's OK now.

Thks 

Thanks for the report.

Please enable the "Verbose" and "Show Build Properties" as shown at the top of this page, also enable the vMicro > Uploader > Verbose option

Then attach the full output from the Output > Micro Build window, for both the build, and upload as separate text files.

I have an idea：
I have copied the file here by modifying platfrom.txt
”C:\Users\qi\source\repos\Blink2\Release\Blink2.ino.bootloader.bin“


But there's no enforcement here. I don't know why.(tools.esptool_py.upload.pattern_args=....... 0x10000 "{build.source.path}/Release/{build.project_name}.bin".....),The path was not identified successfully.

{build.source.path}Not identified as C:\Users\qi\source\repos\Blink2,

Please help me, thank you.

ok，thanks

Sorry the below settings also need to be enabled for us to see all of the information:

vMicro > Compiler > Verbose
vMicro > Compiler > Show Build Properties
vMicro > Uploader > Verbose

Then perform a Build > Clean, and then Build the project, attach this log first.
Then perform the upload, and attach this log either as a separate file, or appended to the end of the first one.

Upload log

It's 2021.01.06.
Did you see the problem in the logs?

Doesn't want to upload firmware.
Log attached to the post.

Under Arduino everything is fine.


Uploading 'readMag_5603' to 'ESP32 Wrover Module' using 'COM27'
Uploader started for board ESP32 Wrover Module
Upload method will be: bootloader
Uploading via Bootloader 
ool.exe --chip esp32 --port "COM27" --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x1000 "D:\temp\VMBuilds\READMA~1\ESP32_~2\Release/readMag_5603.ino.bootloader.bin" 0x8000 "D:\temp\VMBuilds\READMA~1\ESP32_~2\Release/readMag_5603.ino.partitions.bin" 0xe000 /partitions/boot_app0.bin" 0x10000 "D:\temp\VMBuilds\READMA~1\ESP32_~2\Release/readMag_5603.ino.bin"
usage: esptool write_flash [-h] [--erase-all]
                           [--flash_freq {keep,80m,60m,48m,40m,30m,26m,24m,20m,16m,15m,12m}]
                           [--flash_mode {keep,qio,qout,dio,dout}]
                           [--flash_size FLASH_SIZE]
                           [--spi-connection SPI_CONNECTION] [--no-progress]
                           [--verify] [--encrypt]
                           [--encrypt-files <address> <filename> [<address> <filename> ...]]
                           [--ignore-flash-encryption-efuse-setting]
                           [--compress | --no-compress]
                           <address> <filename> [<address> <filename> ...]
esptool write_flash: error: argument <address> <filename>: [Errno 2] No such file or directory: '
The uploader process failed

Thanks for the report.

Can you update Visual Micro to the latest version and try this again without the Upload tool being set?