Jul 13th, 2025 at 7:05am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › RELEASE - 22.09.05.00 VS 2017/2019/2022
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic RELEASE - 22.09.05.00 VS 2017/2019/2022 (Read 445 times)
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2728
Joined: Feb 13th, 2019
RELEASE - 22.09.05.00 VS 2017/2019/2022
Sep 5th, 2022 at 4:43pm
Print Post  
Installer Note: If the install for Visual Studio fails, right click and "Open With>Visual Studio Version Selector"

*** NOTE VS 2022 - If you installed a PRE-RELEASE version of Visual Micro for VS2022 (before 21.11.08.0) please uninstall and install from the gallery, or the link below

Download Visual Micro 22.09.05.00 for Visual Studio 2022
Download Visual Micro 22.09.05.00 for Visual Studio 2017/2019
  • Update: Serial Debugger now works on Raspberry Pi Pico W Board
  • Fix: Intellisense improvements for STM32 boards
  • Fix: Defaulted "Compiler > Always Copy Build Output to Intermediate" to FALSE
  • Fix: ESP32 Compiler Pattern did not have -MMD removed causing erroneous *.d files to be created as part of Deep Search for v2.0.0++ (Reported Here)
  • Update: Added a global option "Communications > Serial Read Frequency" (Default:75ms) to refresh the entire Serial Monitor. (Previous default was 100ms. Min allowed is 15ms)
  • Update: Added a global option to set the "Communications > Serial Read Timeout". Default changed from 100ms to 200ms.



If you have the incorrect index files from previous use of the "Check for updates" button in the Board Manager or Library Manager? After updating you should to click the "Check for Updates" button again on BOTH "board manager" and "library manager". After that clicking rescan or restarting the ide will work without issue. more info
« Last Edit: Sep 10th, 2022 at 3:19am by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.