VS Arduino - TTGO T-Display S3 won't automatically load bin file

Jun 2^nd, 2025 at 7:02pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › › › TTGO T-Display S3 won't automatically load bin file

‹ Previous Topic | Next Topic ›

Pages: 1

TTGO T-Display S3 won't automatically load bin file (Read 1622 times)

retiredArduinoGuy Junior Member Offline Posts: 14 Joined: Jan 29^th, 2020	TTGO T-Display S3 won't automatically load bin file May 29^th, 2024 at 11:32pm	Print Post
	I used to be able to just hit F5 in VS2022 and it would compile and upload to the TTGO. Now it fails and I have to press the boot and reset buttons in order to upload the new code. I thought it was just one chip, but I have tried several of my TTGO's and they all do the same thing. Oddly though, they work once, the first time, and after that require the boot buttons. I'm at a loss, does anybody have any ideas?

	Please Register or Login to the Forum to see File Attachments
	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2709 Joined: Feb 13^th, 2019	Re: TTGO T-Display S3 won't automatically load bin file Reply #1 - May 30^th, 2024 at 9:15am	Print Post
	Thanks for the report, can you let us know the answers to the below questions to help us understand the issue further: 1) Does this happen even if you use the vMicro > Uploader > Upload Last Build button? 2) Have you updated the board package since it used to work reliably? 3) When you say it works the first time, is this with a "fresh from the factory" board?


	WWW Facebook Twitter YouTube IP Logged

retiredArduinoGuy Junior Member Offline Posts: 14 Joined: Jan 29^th, 2020	Re: TTGO T-Display S3 won't automatically load bin file Reply #2 - May 30^th, 2024 at 5:39pm	Print Post
	1 - yes 2 - may have... 3 - yes I'm going to do a fresh install today and see what happens.


	IP Logged

retiredArduinoGuy Junior Member Offline Posts: 14 Joined: Jan 29^th, 2020	Re: TTGO T-Display S3 won't automatically load bin file Reply #3 - Jun 3^rd, 2024 at 11:42pm	Print Post
	I tested some more of the TTGO S3 boards that I have. It appears that I have two of them with the loading problem and others work just fine. Maybe there is something a bit off on the board. Perhaps it is time to hook up a 'scope and look at the serial signals. I also found some posts where others have had similar problems.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›