Oct 26th, 2026 at 8:12am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Monitor Digital Pins on ESP32-S3 Dev board
‹ No Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Monitor Digital Pins on ESP32-S3 Dev board (Read 92 times)
Steven Bennett
Junior Member
**
Offline


Posts: 50
Location: High Bentham
Joined: Nov 2nd, 2022
Monitor Digital Pins on ESP32-S3 Dev board
Oct 18th, 2026 at 3:06pm
Print Post  
If I enable Monitor Digital Pins when serial debugging an ESP32-S3 Dev board the monitor window shows only Pins 0 to 7, which can't be correct as I'm flashing a Neopixel on GPIO48? Also they all show as low and when I run my fingers along the modules pins nothing changes.  By contrast if I do the same on a basic Nano board I see all the digital pins and they jump from low to high to low as I touch them.  Am I doing something wrong or is it a bug?
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12261
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Monitor Digital Pins on ESP32-S3 Dev board
Reply #1 - Oct 21st, 2026 at 2:15pm
Print Post  
sorry for the delay. there needs to be a change. the esp32 doesn't offer digital pin counts and reads quite the same as legacy arduino. we'll try to make a version over the coming week to try.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Steven Bennett
Junior Member
**
Offline


Posts: 50
Location: High Bentham
Joined: Nov 2nd, 2022
Re: Monitor Digital Pins on ESP32-S3 Dev board
Reply #2 - Oct 21st, 2026 at 2:21pm
Print Post  
Thanks Tim-Simon,

I'm ready to field test it for you as soon as you have something.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12261
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Monitor Digital Pins on ESP32-S3 Dev board
Reply #3 - Today at 12:21am
Print Post  
https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES

Debugger dynamic digital pin visualisation - Flexible support for boards that do not have or define the standard pin counts (such as esp32). Dynamic analogues will also be supported shortly. 

add these to a board.txt in the local project (or other Arduino supported .txt file)

vm.debug.pins.digital.count=49
vm.debug.pins.analog.count=0

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ No Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.