Brand new to forum, excuse me if posted in the wrong place...

recipe.hooks.errorbuild.1.pattern=cmd.exe /c {build.project_path}\tools\ntfy_build.cmd failure {build.project_path} is not being run on build error?? This is my complete board.txt file. All works except this line??


# Wood_Burning_Stove build property overrides
#

# Visual Micro board-level build hooks.

# Increment firmware version immediately before compilation.
recipe.hooks.prebuild.90.pattern=cmd.exe /c {build.project_path}\tools\version_prebuild.cmd {build.project_path}


# ntfy: Record build start time.
recipe.hooks.prebuild.92.pattern=cmd.exe /c {build.project_path}\tools\ntfy_build.cmd start {build.project_path}

# ntfy: Notify when build succeeds.
recipe.hooks.postbuild.1.pattern=cmd.exe /c {build.project_path}\tools\ntfy_build.cmd success {build.project_path}

# ntfy: Notify when build fails.
recipe.hooks.errorbuild.1.pattern=cmd.exe /c {build.project_path}\tools\ntfy_build.cmd failure {build.project_path}



# Rebuild web UI assets before uploade work. This should work when JUST UPLOADING, and not Building ...
recipe.hooks.deploy.preupload.1.pattern=cmd.exe /c {build.project_path}\tools\build_web_automated.cmd

# Release COM4, reboot the ESP32, then allow firmware upload.
recipe.hooks.deploy.preupload.2.pattern=cmd.exe /c powershell.exe -NoProfile -ExecutionPolicy Bypass -File {build.project_path}\tools\preupload_esp32.ps1


# Restart PuTTY after upload.
recipe.hooks.deploy.postupload.1.pattern=cmd.exe /c powershell.exe -NoProfile -ExecutionPolicy Bypass -File {build.project_path}\tools\postupload_esp32.ps1

I have Stop On Error selected within the compiler options ... cannot find this topic in the forum. Any thoughts?? VS2026

I have. I also tried adding a compiler error to my intermediated library files and tried both Stop on Error and without stop on error in case it was specific to the .ino file, to no avail . So a test matrix of compiler error in intermediate library file and in the .ino file with with without Stop on Error. All cases did not fire recipe.hooks.errorbuild.1.pattern=cmd.exe /d /s /c ""{build.project_path}\tools\ntfy_build.cmd" failure "{build.project_path}""   

I have another problem with recipe.hooks.deploy.postupload.1.pattern=powershell.exe -NoProfile -ExecutionPolicy Bypass -File "{build.project_path}\tools\postupload_esp32.ps1" -Port "{serial.port}" -BuildPath "{build.path}" -ProjectRoot "{build.project_path}" whereby it runs after firmware upload, but if I turn on "Automatic FS Upload: ON" it still runs after firmware upload, but before FS upload. Is there a hook for FS upload phase. My work around for this issue is that I simply create  a separate process with a 120second delay before it runs, which allows the FS Upload to finish.... I basically automatically start PUTTY after the upload automatically during development process...  probably not related, but still a hook issue. Thanks for your inquiry ....