Dec 17th, 2025 at 10:08am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Uploading to board verbose output
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Uploading to board verbose output (Read 4841 times)
Fex
Junior Member
**
Offline


Posts: 10
Joined: Jul 21st, 2014
Uploading to board verbose output
Jun 2nd, 2015 at 7:39am
Print Post  
Hello,


I re-visited Visual Micro last night and I am glad I did, the integration with Arduino IDE is much better than half a year ago and I really really enjoy Visual Studio. 

What I noticed is that when uploading the compiled sketch to the board, Visual Studio will not provide the same verbose output as Arduino does. Some of my boards require manual resets and I use the output to coordinate these resets. 

Is there any way to get the maximum verbose output equal to the Arduino IDE?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12203
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Uploading to board verbose output
Reply #1 - Jun 2nd, 2015 at 1:53pm
Print Post  
Hi,

Thanks for the post. I looked at your posts from last year and it appeared you had entered the ide location incorrectly. The errors were not errors that others were encountering at the time Smiley

Yes we will look at async compiler messages so that you can see them more easily. What is it that you wait to see prior to upload? What board are you using? Which Arduino ide name in Visual Micro?

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Fex
Junior Member
**
Offline


Posts: 10
Joined: Jul 21st, 2014
Re: Uploading to board verbose output
Reply #2 - Jun 2nd, 2015 at 5:02pm
Print Post  
Allright,


Right now I have a few Sparkfun Pro Mini 328p @ 16Mhz that need the reset button to be pressed after compiling and before uploading. But any output that I could potentially miss is of value to me, I would simply like this option. 

Thanks for letting me know, I will continue using your product. It works great.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12203
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Uploading to board verbose output
Reply #3 - Jun 2nd, 2015 at 5:09pm
Print Post  
Hi Fex

Understood.

You should see when the compile ends so i hope that helps.

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Fex
Junior Member
**
Offline


Posts: 10
Joined: Jul 21st, 2014
Re: Uploading to board verbose output
Reply #4 - Jun 2nd, 2015 at 10:37pm
Print Post  
Ah, it turns out I needed to set the Verbose Messages option in the Tools > Visual Micro menu. 

The additional output allows me to time my reset button press more easily. Thanks again.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.