Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Uploading to board verbose output (Read 3277 times)
Fex
Junior Member
**
Offline



Posts: 10
Uploading to board verbose output
Jun 2nd, 2015 at 8:39am
 
Hello,


I re-visited Visual Micro last night and I am glad I did, the integration with Arduino IDE is much better than half a year ago and I really really enjoy Visual Studio.

What I noticed is that when uploading the compiled sketch to the board, Visual Studio will not provide the same verbose output as Arduino does. Some of my boards require manual resets and I use the output to coordinate these resets.

Is there any way to get the maximum verbose output equal to the Arduino IDE?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10529
United Kingdom
Re: Uploading to board verbose output
Reply #1 - Jun 2nd, 2015 at 2:53pm
 
Hi,

Thanks for the post. I looked at your posts from last year and it appeared you had entered the ide location incorrectly. The errors were not errors that others were encountering at the time Smiley

Yes we will look at async compiler messages so that you can see them more easily. What is it that you wait to see prior to upload? What board are you using? Which Arduino ide name in Visual Micro?

Thanks
Back to top
 
WWW  
IP Logged
 
Fex
Junior Member
**
Offline



Posts: 10
Re: Uploading to board verbose output
Reply #2 - Jun 2nd, 2015 at 6:02pm
 
Allright,


Right now I have a few Sparkfun Pro Mini 328p @ 16Mhz that need the reset button to be pressed after compiling and before uploading. But any output that I could potentially miss is of value to me, I would simply like this option.

Thanks for letting me know, I will continue using your product. It works great.
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10529
United Kingdom
Re: Uploading to board verbose output
Reply #3 - Jun 2nd, 2015 at 6:09pm
 
Hi Fex

Understood.

You should see when the compile ends so i hope that helps.

Thanks
Back to top
 
WWW  
IP Logged
 
Fex
Junior Member
**
Offline



Posts: 10
Re: Uploading to board verbose output
Reply #4 - Jun 2nd, 2015 at 11:37pm
 
Ah, it turns out I needed to set the Verbose Messages option in the Tools > Visual Micro menu.

The additional output allows me to time my reset button press more easily. Thanks again.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print