May 13th, 2025 at 7:05pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Assign JTAG for upload
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 8 Replies) Assign JTAG for upload (Read 3775 times)
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Assign JTAG for upload
Jul 7th, 2019 at 1:28pm
Print Post  
Is it possible to assign JTAG debugger for uploading compiled binary to target board instead of serial port?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Assign JTAG for upload
Reply #1 - Jul 7th, 2019 at 1:45pm
Print Post  
Currently you have just the arduino programmers list on the vMicro>Uploader menu. You can add to this list but we will add some additional programmer over the coming few weeks.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: Assign JTAG for upload
Reply #2 - Jul 7th, 2019 at 2:16pm
Print Post  
There is no choice in the Programmer field.
If I try to alter Allways use Programmer for Upload... field I got warning info.
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Assign JTAG for upload
Reply #3 - Jul 7th, 2019 at 2:21pm
Print Post  
This means the author the core you are using has not added a programmer to the list. They can follow the Arduino 3rd party hardware spec. to see how to add programmers.

We can force additional ones into the list when users submit the "programmers.txt" definition to us or we can add them on request when time allows.

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: Assign JTAG for upload
Reply #4 - Jul 7th, 2019 at 2:27pm
Print Post  
Am I right that VM does not use Arduino definitions( platform.txt, programmers.txt) but uses its own?
If so, where these files located?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Assign JTAG for upload
Reply #5 - Jul 7th, 2019 at 2:29pm
Print Post  
No, we use same definitions as the Arduino IDE

The vMicro>Compiler>"Show build properties" and "verbose" show you locations of tool chains and also the Platform Explorer has links at the bottom preview when hovering boards and board manager
« Last Edit: Jul 7th, 2019 at 2:31pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: Assign JTAG for upload
Reply #6 - Jul 7th, 2019 at 2:30pm
Print Post  
OK, I'll try.
  
Back to top
 
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: Assign JTAG for upload
Reply #7 - Jul 12th, 2019 at 10:00am
Print Post  
I do not know how, but in VisualGDB, they did it. COM port is not affected  during upload. And it is very comfortable, not to switch serial on/off.

They did nothing with programmers.txt. It has zero length.
  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2697
Joined: Feb 13th, 2019
Re: Assign JTAG for upload
Reply #8 - Jul 12th, 2019 at 10:12am
Print Post  
Can you confirm which programmer and board you are trying to use for this upload?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: Assign JTAG for upload
Reply #9 - Jul 12th, 2019 at 10:18am
Print Post  
I use Wrover Kit with native FT3223 debuger
  
Back to top
 
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: Assign JTAG for upload
Reply #10 - Aug 17th, 2019 at 10:33am
Print Post  
As I see the latest release utilize JTAG for flash uploading.
Bravo!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.