Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Assign JTAG for upload (Read 414 times)
Kabron
Junior Member
**
Offline



Posts: 95
Assign JTAG for upload
Jul 7th, 2019 at 2:28pm
 
Is it possible to assign JTAG debugger for uploading compiled binary to target board instead of serial port?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10464
United Kingdom
Re: Assign JTAG for upload
Reply #1 - Jul 7th, 2019 at 2:45pm
 
Currently you have just the arduino programmers list on the vMicro>Uploader menu. You can add to this list but we will add some additional programmer over the coming few weeks.
Back to top
 
WWW  
IP Logged
 
Kabron
Junior Member
**
Offline



Posts: 95
Re: Assign JTAG for upload
Reply #2 - Jul 7th, 2019 at 3:16pm
 
There is no choice in the Programmer field.
If I try to alter Allways use Programmer for Upload... field I got warning info.
Back to top
 

choice.jpg (45 KB | 1 )
choice.jpg
prog.jpg (29 KB | 1 )
prog.jpg
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10464
United Kingdom
Re: Assign JTAG for upload
Reply #3 - Jul 7th, 2019 at 3:21pm
 
This means the author the core you are using has not added a programmer to the list. They can follow the Arduino 3rd party hardware spec. to see how to add programmers.

We can force additional ones into the list when users submit the "programmers.txt" definition to us or we can add them on request when time allows.

Back to top
 
WWW  
IP Logged
 
Kabron
Junior Member
**
Offline



Posts: 95
Re: Assign JTAG for upload
Reply #4 - Jul 7th, 2019 at 3:27pm
 
Am I right that VM does not use Arduino definitions( platform.txt, programmers.txt) but uses its own?
If so, where these files located?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10464
United Kingdom
Re: Assign JTAG for upload
Reply #5 - Jul 7th, 2019 at 3:29pm
 
No, we use same definitions as the Arduino IDE

The vMicro>Compiler>"Show build properties" and "verbose" show you locations of tool chains and also the Platform Explorer has links at the bottom preview when hovering boards and board manager
Back to top
« Last Edit: Jul 7th, 2019 at 3:31pm by Visual Micro »  
WWW  
IP Logged
 
Kabron
Junior Member
**
Offline



Posts: 95
Re: Assign JTAG for upload
Reply #6 - Jul 7th, 2019 at 3:30pm
 
OK, I'll try.
Back to top
 
 
IP Logged
 
Kabron
Junior Member
**
Offline



Posts: 95
Re: Assign JTAG for upload
Reply #7 - Jul 12th, 2019 at 11:00am
 
I do not know how, but in VisualGDB, they did it. COM port is not affected  during upload. And it is very comfortable, not to switch serial on/off.

They did nothing with programmers.txt. It has zero length.
Back to top
 
 
IP Logged
 
Simon Hopkinson
Administrator
*****
Offline



Posts: 43
Re: Assign JTAG for upload
Reply #8 - Jul 12th, 2019 at 11:12am
 
Can you confirm which programmer and board you are trying to use for this upload?
Back to top
 
 
IP Logged
 
Kabron
Junior Member
**
Offline



Posts: 95
Re: Assign JTAG for upload
Reply #9 - Jul 12th, 2019 at 11:18am
 
I use Wrover Kit with native FT3223 debuger
Back to top
 
 
IP Logged
 
Kabron
Junior Member
**
Offline



Posts: 95
Re: Assign JTAG for upload
Reply #10 - Aug 17th, 2019 at 11:33am
 
As I see the latest release utilize JTAG for flash uploading.
Bravo!
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print