VS Arduino - Bossa Programming failures

Apr 19^th, 2024 at 5:39am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Installation & Troubleshooting › Bossa Programming failures - unsupported

‹ Previous Topic | Next Topic ›

Pages: 1

Bossa Programming failures - unsupported (Read 1256 times)

Rich R Junior Member Offline Posts: 31 Joined: Mar 2^nd, 2016	Bossa Programming failures - unsupported Jul 25^th, 2019 at 7:32pm	Print Post
	I can not upload the Blink example to a feather m4 Sam51D. I have tried with both the arduino IDE and Visual Micro within Studio. AF SAMD library is current, the issue is the Bossac uploader shows it doesn't support the device. Error is below, and I've uploaded the full build and picture of the IDE setup. I saw a post with questions / suggestions on replacing the adafruit samd board package which i did, but no luck. Loading Blink on a Mac Arduino IDE and the same hardware works fine, settings in IDE are the same so it's not the feather itself. thoughts? Uploading using selected port: COM35 .0-48-gb176eee/bossac -i -d --port=COM35 -U -i --offset=0x4000 -w -v C:\Users\RICHAR~1\AppData\Local\Temp\arduino_build_275109/Blink.ino.bin -R Set binary mode version()=SUE0744,4# Connected at 921600 baud readWord(addr=0)=0x55534253 readWord(addr=0xe000ed00)=0x30303030 Device unsupported readWord(addr=0x400e0740)=0x23342c30 readWord(addr=0x400e0744)=0x53425300 An error occurred while uploading the sketch
	« Last Edit: Jul 25^th, 2019 at 7:37pm by Rich R »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Bossa Programming failures - unsupported Reply #1 - Jul 25^th, 2019 at 7:57pm	Print Post
	Hi That is an Adafruit board so best to ask them how to make it work in the Arduino IDE. We are currently adding a lot of new programmers that are missing from the Arduino IDE so we can look at this but it will be a week or two. However our additional won't help the Arduino IDE so that's why you should speak with Adafruit.


	WWW IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Bossa Programming failures - unsupported Reply #2 - Jul 28^th, 2019 at 2:45pm	Print Post
	1907.26.9 is in the releases section of this forum. There is still more testing to do but you might find a better programmer in the list for your purposes. We have added new programmers to most tool chains with name that ends with (vmicro)


	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›