VS Arduino - The Marlin project build fails (Arduino compiles Ok)

Dec 20^th, 2025 at 11:30am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Enabled vMicro > Compiler > Show Build Properties
Re-Compile your program with these settings enabled

Save the new Output to a Text File and....

Click the Reply button and attach as .txt file OR
Click here to Email us with the file attached, and a link to your post

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Installation & Troubleshooting › The Marlin project build fails (Arduino compiles Ok)

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

The Marlin project build fails (Arduino compiles Ok) (Read 4535 times)

audeo Newbies Offline Posts: 5 Joined: Oct 10^th, 2019	The Marlin project build fails (Arduino compiles Ok) Oct 10^th, 2019 at 8:01pm	Print Post
	I love the tools that Visual Studio has to offer, so I downloaded and installed Visual Micro years ago when I had 2017 still. Now I'm running VS 2019 with the same issues as before. Basically, I am trying to modify and flash Marlin (3d printer firmware) onto an Atmega2560-powered board. It compiles and runs perfectly when flashed from Arduino, but it is super inconvenient to have to switch back and forth between two IDE's. I have no idea why this keeps happening, and has happened for the longest time, but it WILL. NOT. COMPILE. I just get a ton of errors. Code (C++) Compiling 'Marlin' for 'ATmega2560 (Mega 2560) (Arduino/Genuino Mega)' MarlinConfig.h:40: In file included from Marlin.ino:31: from SanityCheck.h: 1119:5: error: non-constant condition for static assertion static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF) ^~~~~~~~~~~~~ fastio.h:50: In file included from MarlinConfig.h:26: from Marlin.ino:31: from fastio_1280.h: 112:21: error: reinterpret_cast from integer to pointer #define DIO6_PWM &OCR4AL fastio.h:99: note in expansion of macro DIO6_PWM #define _GET_TIMER(IO) (DIO ## IO ## _PWM) ^~~ fastio.h:111: note in expansion of macro _GET_TIMER #define GET_TIMER(IO) _GET_TIMER(IO) ^~~~~~~~~~ SanityCheck.h:1119: note in expansion of macro GET_TIMER static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF) ^~~~~~~~~ MarlinConfig.h:40: In file included from Marlin.h:36: from blinkm.cpp:28: from Error compiling project sources SanityCheck.h: 1119:5: error: non-constant condition for static assertion Build failed for project 'Marlin' static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF) ^~~~~~~~~~~~~ fastio.h:50: In file included from MarlinConfig.h:26: from Marlin.h:36: from blinkm.cpp:28: from fastio_1280.h: 112:21: error: reinterpret_cast from integer to pointer #define DIO6_PWM &OCR4AL fastio.h:99: note in expansion of macro DIO6_PWM #define _GET_TIMER(IO) (DIO ## IO ## _PWM) ^~~ fastio.h:111: note in expansion of macro _GET_TIMER #define GET_TIMER(IO) _GET_TIMER(IO) ^~~~~~~~~~ SanityCheck.h:1119: note in expansion of macro GET_TIMER static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF) ^~~~~~~~~ Yes, I have Arduino IDE 1.6/1.8 selected. Yes, I have the board selected. I feel like I'm missing something, anyone else have this problem?
	« Last Edit: Oct 11^th, 2019 at 3:43pm by Tim@Visual Micro »

	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: The Marlin project build fails (Arduino compiles Ok) Reply #1 - Oct 10^th, 2019 at 8:24pm	Print Post
	Please give download link for the project and also follow the guide in yellow above so we can ensure we have same tool chain and.or library version(s) to replicate.
	« Last Edit: Oct 11^th, 2019 at 3:44pm by Tim@Visual Micro »

	WWW Facebook Twitter YouTube IP Logged

audeo Newbies Offline Posts: 5 Joined: Oct 10^th, 2019	Re: The Marlin project build fails (Arduino compiles Ok) Reply #2 - Oct 10^th, 2019 at 10:19pm	Print Post
	https://github.com/MakerGear/m3firmware/tree/1.1.6 Please take note of the instructions, you have to uncomment a line in order to activate a printer. The machine I am using is the M3ID Rev1. Quote: Before you can compile, you must select your 3D printer configruation by editing the file Marlin/Configuration_makergear.h Uncomment one of the #define statements depending on your printer. For example if you have an M3-ID Rev1, find //Standard M3 ID Rev1 with Probe // #define MAKERGEAR_MODEL_M3_ID_REV1_000 and replace it with //Standard M3 ID Rev1 with Probe #define MAKERGEAR_MODEL_M3_ID_REV1_000 I'll attach the output as a text file.
	« Last Edit: Oct 11^th, 2019 at 3:44pm by Tim@Visual Micro »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: The Marlin project build fails (Arduino compiles Ok) Reply #3 - Oct 11^th, 2019 at 3:41pm	Print Post
	We have looked at this and suspect that if your project builds OK in the arduino ide then you are using a different arduino version than you have assigned to Visual Micro 1.6/1.8 Your project does not build in the recent arduino IDEs, however we found it built okay in Arduino IDE 1.8.2. In Visual Micro, you do not have to change the IDE that Visual Micro points, that will not help. You just need to switch off the feature that adds a compiler include path for the current project folder. See attached image. The issue is that in recent Arduino versions the project include path is added autoatmically, this is why it became an option in Visual Micro with the option being enabled by default. The Marlin project uses an spi.h which then confused the lookup for the expected SPI.h library. Windows is not case sensitive and I think the author or the mearlin project is not using windows so missed this fact.
	« Last Edit: Oct 11^th, 2019 at 3:44pm by Tim@Visual Micro »
	Please Register or Login to the Forum to see File Attachments
	WWW Facebook Twitter YouTube IP Logged

audeo Newbies Offline Posts: 5 Joined: Oct 10^th, 2019	Re: The Marlin project build fails (Arduino compiles Ok) Reply #4 - Oct 12^th, 2019 at 3:12pm	Print Post
	Thank you for this insight. Unfortunately this did not fix the problem. A quick note: I am using Arduino IDE version 1.8.10. Here is a screenshot of the compiler menu for the VMicro extension after making this change:
	« Last Edit: Oct 12^th, 2019 at 3:17pm by audeo »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: The Marlin project build fails (Arduino compiles Ok) Reply #5 - Oct 12^th, 2019 at 3:23pm	Print Post
	Please switch the tool bar from Debug to Relase and click build. The post the output as .txt. Thanks


	WWW Facebook Twitter YouTube IP Logged

audeo Newbies Offline Posts: 5 Joined: Oct 10^th, 2019	Re: The Marlin project build fails (Arduino compiles Ok) Reply #6 - Oct 12^th, 2019 at 3:39pm	Print Post
	Update to a previous claim: I actually had updated to Arduino IDE 1.8.10 about a week ago, but I never tested Marlin on it. I get the same issues with Arduino IDE as I do with Visual Micro, that is multiple instances of SPI.h and build errors. Any other advice on fixing this issue?


	IP Logged

audeo Newbies Offline Posts: 5 Joined: Oct 10^th, 2019	Re: The Marlin project build fails (Arduino compiles Ok) Reply #7 - Oct 12^th, 2019 at 3:43pm	Print Post
	Ran in "Release" mode, same issue. BIG UPDATE: I uninstalled 1.8.10 and then installed 1.8.0 and now Arduino IDE and VMicro are working.
	« Last Edit: Oct 12^th, 2019 at 3:57pm by audeo »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: The Marlin project build fails (Arduino compiles Ok) Reply #8 - Oct 12^th, 2019 at 4:58pm	Print Post
	Thanks for the update that's good to hear. The issue happens when the following is defined. // #define BLINKM
	« Last Edit: Oct 12^th, 2019 at 4:59pm by Tim@Visual Micro »

	WWW Facebook Twitter YouTube IP Logged

Pages: 1

Send Topic

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Cookie Consent