Nov 2nd, 2025 at 8:33am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Hardware Debugging (GDB, GDB WiFi, GDB Stub) › Visual Micro VS2017 Error Message Debug Attach To Process
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 8 Replies) Visual Micro VS2017 Error Message Debug Attach To Process (Read 3333 times)
iKjetil
Newbies
*
Offline


Posts: 4
Joined: Dec 19th, 2019
Visual Micro VS2017 Error Message Debug Attach To Process
Dec 19th, 2019 at 12:12pm
Print Post  
The error message I get is:
---------------------------
Microsoft Visual Studio
---------------------------
Unable to start debugging. GDB exited unexpectedly with exit code 1 (0x1).

I have read on this forum that there was supposed to be a simpler gdb config scheme coming that would make these errors go away.

Any help solving this problem? Thanks.

iKjetil
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12201
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #1 - Dec 19th, 2019 at 1:11pm
Print Post  
Please follow the guide in the yellow box above
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2807
Joined: Feb 13th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #2 - Dec 19th, 2019 at 1:26pm
Print Post  
Would you be able to send a screenshot of the error + IDE, and the logs from the Output Window > Micro Build and Debug ?

Just so we know what debugger / board configuration you are using, and the window output will contain further detail.  Most often this is a wiring or driver issue, but it depends on the debugger as to what drivers may be needed.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
iKjetil
Newbies
*
Offline


Posts: 4
Joined: Dec 19th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #3 - Dec 19th, 2019 at 1:36pm
Print Post  
I have followed the yellow box, so the information should be available soon.

iKjetil
  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2807
Joined: Feb 13th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #4 - Dec 19th, 2019 at 2:23pm
Print Post  
Thanks for the build information, and we can see it is a DUE Programming port with Atmel ICE Probe

When you attach the debugger you should see something like the below in the Output Window (select Debug from the list at the top of the output window):

Code
Select All
Starting: "C:\ProgramData\vmicro\tools\openocd-0.10.0.1\bin/openocd.exe" -d2 -l due_x_dbg\Debug/SAM-DUE_ATMELICE_BLINK_GDB.ino_DebugOpenOCD.log}" -s "C:\ProgramData\vmicro\tools\openocd-0.10.0.1/share/openocd/scripts/" -c "interface cmsis-dap" -c "cmsis_dap_vid_pid 0x03eb 0x2141" -c "set CHIPNAME at91sam3X8E" -c "source [find target/at91sam3ax_8x.cfg]" -c "init; reset halt"
Starting: \4.8.3-2014q1/bin\arm-none-eabi-gdb.exe" --interpreter=mi


One of the first parameters is the OpenOCD Log which will show if the debugger has been found (from above):
Code
Select All
e_x_dbg\Debug/SAM-DUE_ATMELICE_BLINK_GDB.ino_DebugOpenOCD.log


Would you be able to send this log file, and the Debug Output over after trying to attach the debugger as well?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
iKjetil
Newbies
*
Offline


Posts: 4
Joined: Dec 19th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #5 - Dec 19th, 2019 at 2:32pm
Print Post  
Se attached files for requested debug output window and ocd log. Smiley

iKjetil
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2807
Joined: Feb 13th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #6 - Dec 19th, 2019 at 2:54pm
Print Post  
The output in the log shows it can successfully see the ICE Debugger, but cant connect to the board.  

Can you confirm your wiring is as below (SAM port on ICE, and orientation of ribbon cable is important)

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
iKjetil
Newbies
*
Offline


Posts: 4
Joined: Dec 19th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #7 - Dec 19th, 2019 at 3:12pm
Print Post  
My God! Was it that easy!

I had the cable from SAM port the wrong way but it gave me a green light. So I believed it was correct.

Thank you so much! Cheesy Cheesy

Best

iKjetil
  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2807
Joined: Feb 13th, 2019
Re: Visual Micro VS2017 Error Message Debug Attach To Process
Reply #8 - Dec 19th, 2019 at 3:17pm
Print Post  
I have done that myself many times, so know the frustration.

Glad its all working now and hope the debugging helps now its running  Smiley

Updated SAM Debugging Doc: https://www.visualmicro.com/page/SAM-Debugging.aspx
« Last Edit: Dec 19th, 2019 at 3:31pm by Simon@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.