VS Arduino - Serial monitor on Wifi port connection

Mar 20^th, 2026 at 12:18am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › › › Serial monitor on Wifi port connection

‹ Previous Topic | Next Topic ›

Pages: 1

Serial monitor on Wifi port connection (Read 3778 times)

Luis Cerato Newbies Offline Posts: 1 Joined: Feb 13^th, 2020	Serial monitor on Wifi port connection Feb 13^th, 2020 at 3:58pm	Print Post
	Hello, I want to know where the serial monitor connect to when I choose a IP direction instead of serial COM port. Once the code is loaded over OTA on ESP32 board, if I open the serial monitor it connect to somewhere. At least the Connect status turn green, indicating it's connected. So, where it connect? To some port on the ESP32 board? Or, is there a way to use this connection to show remote data? Regards.

	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12204 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Serial monitor on Wifi port connection Reply #1 - Feb 13^th, 2020 at 5:32pm	Print Post
	We are working on the OTA debugger and also the terminal for Esp boards. Hopefully available over the next or so. Currently Ip address terminal is for Arduino boards that use SSH but that is an older more cumbersome system than the ESP solution.


	WWW Facebook Twitter YouTube IP Logged

Simon@Visual Micro Administrator Offline Posts: 2867 Joined: Feb 13^th, 2019	Re: Serial monitor on Wifi port connection Reply #2 - Mar 5^th, 2020 at 6:42pm	Print Post
	In the latest forum release the Serial Debugger will work over the UDP transport on the ESP32 platform, to give a wireless debugging experience with all the Break/Watch/@plot etc.. features of the Serial Debugger.... just not the wires. There is a walk through video on YouTube, and we will update when we have finalised the route to output your own custom messages to the Serial monitor window.


	WWW Facebook Twitter YouTube IP Logged

tfact129 Junior Member Offline Posts: 14 Joined: May 30^th, 2019	Re: Serial monitor on Wifi port connection Reply #3 - Jul 22^nd, 2020 at 8:07am	Print Post
	Any news here?


	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2867 Joined: Feb 13^th, 2019	Re: Serial monitor on Wifi port connection Reply #4 - Jul 23^rd, 2020 at 5:32pm	Print Post
	We have released an update 20.07.08.4, which will allow custom messages to be sent:- https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES To Send a Custom Message 1) Ensure the Serial Debugger is enabled as normal, with the UDP options set 2) Add the call as below, with the message you want to send (ignore intellisense error, it will build when compiled) Code MicroDebug.sendUserMessage("Hello UDP-Serial Terminal"); 3) Connect the UDP debugger as normal, and your message should now appear in the Remote Serial Monitor window. Let us know if you have any problems around this, and we will be updating the documentation to explain this feature shortly.


	WWW Facebook Twitter YouTube IP Logged

tfact129 Junior Member Offline Posts: 14 Joined: May 30^th, 2019	Re: Serial monitor on Wifi port connection Reply #5 - Jul 23^rd, 2020 at 6:06pm	Print Post
	That's great


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›