Nov 6th, 2025 at 6:31pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Industruino PROTO D21G
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Industruino PROTO D21G (Read 4569 times)
groz
Junior Member
**
Offline


Posts: 26
Joined: Feb 21st, 2018
Industruino PROTO D21G
Feb 21st, 2018 at 5:16pm
Print Post  
I'm a paying customer that has been using your pluggin for VS. While its been extremely useful, I really miss the single step debug feature of the regular VS environment. 

Future projects for me are going to be based around the Industruino Proto D21G controller. I've added a link below for more information. While its very close to the arduino zero, its not entirely a match and therefore has its own board definition file.

Can you help with configuring this board for GDB support? Your directions are way over my pay grade and I'll need help.

Thanks

Links:
Product Description:
https://industruino.com/shop/product/industruino-proto-d21g-8

Configuration (board manager):
https://industruino.com/page/techcentre

Board Variant Definitions:
https://github.com/Industruino/IndustruinoSAMD/blob/master/variants/industruino_...
https://github.com/Industruino/IndustruinoSAMD/blob/master/variants/industruino_...
« Last Edit: Feb 24th, 2018 at 1:52pm by groz »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12201
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Industruino PROTO D21G
Reply #1 - Apr 30th, 2018 at 11:24pm
Print Post  
did  you get a chance to try the debugger?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
groz
Junior Member
**
Offline


Posts: 26
Joined: Feb 21st, 2018
Re: Industruino PROTO D21G
Reply #2 - Apr 30th, 2018 at 11:43pm
Print Post  
I've been really busy working on other projects. The process is a bit more than what I originally thought. VM works REALLY well for my needs. Down the road I'll pick it back up and give it a go.

By the way, the intellisense feature works great...Thanks
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12201
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Industruino PROTO D21G
Reply #3 - Apr 30th, 2018 at 11:47pm
Print Post  
Great.

When you get time. Debug should just be switching the tool bar from Release to Debug then uploading. That should build OK and pause at an example break-point

Good to hear the main system is working well thanks

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2807
Joined: Feb 13th, 2019
Re: Industruino PROTO D21G
Reply #4 - Aug 21st, 2019 at 10:49am
Print Post  
vMicro now supports a range of additional hardware debuggers out of the box, including the SAMD platform which should allow this board to work:

SAMD Debugging: https://www.visualmicro.com/page/SAMD-Debugging.aspx

Debugger List: https://www.visualmicro.com/page/DebuggerSupportList.aspx
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.