May 13th, 2025 at 5:39pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Switched projects - hardware debugging stopped working :(
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Switched projects - hardware debugging stopped working :( (Read 1016 times)
HomerRamone
Junior Member
**
Offline


Posts: 43
Joined: Feb 5th, 2022
Switched projects - hardware debugging stopped working :(
Feb 23rd, 2022 at 7:41pm
Print Post  
Having got the debugger working I thought I was all set.
I have a couple of projects in progress and was trying to track down a bug in one of them. 

Previously ive build and run this project on a regular esp 32 and used serial debugging. But being able to BP a function and step will be super handy here.
So I switched over the boards and restarted VS.
Changed the settings for board and debugger. 
No luck. Then I remembered board.txt. So I followed the same process of creating the file, pasted the text.
Added breakpoint and tried to debug.

Starts initializing the debugger then pops a dialog:
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2697
Joined: Feb 13th, 2019
Re: Switched projects - hardware debugging stopped working :(
Reply #1 - Feb 24th, 2022 at 10:03am
Print Post  
Thanks for the report.

The Troubleshooting pages below may help identify the issue:
https://www.visualmicro.com/page/Troubleshooting-Debugging.aspx
https://www.visualmicro.com/page/Troubleshooter-for-Debugging-an-Arduino-Sketch-...

If not then please enable the below properties:
vMicro > Compiler > Verbose
vMicro > Compiler > Show Build Properties
vMicro > Uploader > Verbose

And then attach as text files the output from:
1) The Output > Micro Build Window, after completing a full build, and running Debug > Attach to Process
2) In the build folder there should be a log created <<projectname>>_OpenOCD.log
https://www.visualmicro.com/page/Troubleshooter-for-Debugging-an-Arduino-Sketch-...
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.